AS-Motor’s entry-level ride-on mower for private properties and meadow orchards
AS-Motor’s ride-on mower family starts with the AS 799 Rider, equipped with a 344 ccm Briggs & Stratton Series 3 Powerbuilt engine with gear reduction drive and up to 10.6 hp. A closed mower deck mulches grass up to 60 cm high, while cutting heights can be adjusted to 4 levels between 35–85 mm. Hydrostatic transmission allows the precise adaptation of speed to match the terrain, reaching 8.0 km/h and 6.0 km/h in reverse. When in park, the mowing unit switches off automatically via a mechanical blade clutch.
A length-adjustable bucket seat provides a comfortable upright sitting position and ample legroom while the AS 799 Rider’s smooth steering system guarantees fatigue-free work. Work rates up to 6,400 m² per hour are possible thanks to the 80 cm cutting height, powerful engine and hydrostatic transmission. A 15-litre tank means longer work periods without refueling. The AS 799 Rider is suited for level terrain and slight inclines.
- Gear-reduction blade drive (AS 799) Effortlessly mow grass up to 60 cm high with the gear-reduction blade drive.
Features and Benefits
Blade system
Closed mowing deck with rear discharge for the best mulching results.
Comfortable work
Comfortable sitting position, while a low centre of gravity and side deflectors provide additional safety.
Cutting height
Four-level, central cutting height adjustment with automatic blade stop in transport position.
Warranty
AS-Motor machines are covered by the manufacturer’s warranty. Please refer to the manufacturer’s warranty terms for full cover, conditions and exclusions.
Technical Data
| cutting width | 80 cm |
|---|---|
| engine manufacturer | B&S |
| engine type | Series 3 Powerbuilt |
| 4-Stroke engine, single-cylinder / twin-cylinder | / |
| displacement | 344 cm³ |
| work rate max. | 7,8/10,6 kW (hp) |
| rated power | 6,5/8,8 kW (hp) |
| nominal speed | 3200 rpm |
| traction drive, 2WD rear / 4WD permanent | / |
| speed max. | 8 km/h |
| Single knife / cross knife / Y-flail | / / |
| side discharge / rear discharge | / |
| cutting height | 35 – 85 mm |
| ill quantity – fuel tank | 15 l |
| seat suspention, standard / option | / |
| Dimension L/W/H | 170x87x96 cm |
| weight | 204 kg |
Specifications are supplied by AS-Motor and may change without notice. Images are for illustrative purposes only.
Why buy from us?
At HGM, we're as passionate about customer service as we are about the machines we sell. We go out of our way to help you get the best value and the most out of your purchases. That's why we offer a better, more personal service than any other dealer, both online and in-store.
- We never sell a machine in a box - whether you choose to have your machine delivered, or to collect from our showroom, every machine we sell comes fully assembled, fueled and oiled/fully charged, and ready for you to take home and use straight away.
- We hand-deliver to your door - if you find you're having trouble making your way to our showroom, we can deliver your machine to your door, and our friendly driver will even demonstrate the machine for you if you'd like help getting started with it
- We're here for you even after the purchase - we aren't content to sell you a machine and then walk away. Our phone lines are open 5 days a week for any support or queries about your machine, and if there's an issue with your machine that needs repair, we can take it into our workshop.
- We'll prioritise you if anything goes wrong - in the rare case that something does go wrong, you'll benefit from top-priority warranty support for machines purchased from us directly.
It's all part of our Shop2Shed service - that's the HGM difference!
